The Excel™ product line is designed for system integrators, distributors, installers and building owners presently using low cost import or private label brand access control hardware.
The new SDC S6000D Spectra latch retraction exit device consumes only 1 Amp on actuation and 180 mA continuous @ 12/24VDC when energized. Available in rim mount, mortise and vertical rod configurations exit devices are equipped with a motor and latch and push pad operation is quick and quiet. The low current operation permits the use of standard power transfer hinges while eliminating the need for costly high current power supplies. SDC’s standard 602RF 1 Amp power supply may be used to power a single device, while the addition of the SDC EMC Sequencer Module enables operation for double doors and automatic doors.
ISC West New Product Preview Visit SDC Booth #19109
The new SDC S6000H alarm exit device is available with 9V battery power or a 12/24VDC power input. Features include an alarm tone, LED status indicator, low battery alert, selectable arming delay and remote status monitoring. Field selectable alarm modes include continuous alarm with manual key reset or 2 minute alarm with automatic reset. Available in rim mount, vertical rod and mortise panic or fire exit device configurations.
The new SDC S6000M Spectra electrified mortise panic and fire exit devices are field reversible for failsafe or failsecure operation. Applications include fire rated and non-fire rated doors including stairwell doors when failsafe operation is selected. Whether utilizing failsafe or failsecure operation, the door stays latched when unlocked, maintaining fire door integrity. Failsafe mode may be unlocked by power loss or signal from the fire command center. Other features include, field selectable 12/24VDC operation, 300 mA low current draw and optional monitoring capability. Complies with national fire and building codes.
The new SDC S6000D series delayed egress panic and fire exit devices are available in rim mount, mortise and vertical rod configurations. A wall mount controller incorporates all delayed egress logic for 15 or 30 second exit delay, alternating 85 db tone and voice message with a digital countdown display that provides clear and comprehensive instructions for persons without prior knowledge of door operation and personnel notification. A keypad provides reset and bypass control eliminating the need of keys that may be misplaced or lost. Applications include retail loss prevention, wandering patient control and nursery infant protection.
The new SDC S6000H Hitower fire rated exit device is controlled by an electric frame actuator mounted in the strike jamb and eliminates the need for power transfer hinges and costly raceway preparation for wires through the door. Features include choice of 12 or 24VDC, failsafe operation and optional monitoring. Applications for use include fire rated doors with hollow metal frames, including stairwell and exit door. While unlocked by an access control, power loss or signal from a fire command center, the door stays latched even when unlocked, maintaining fire door integrity in a fire emergency. Complies with national fire and building codes.
Download the Price List 74 page PDF file now from our website. Go to the Literature Request Page to request hard copies.
Downloadable from our website software that contains all datasheets, ShipQUICK Inventory, Price List, Animated Product Presentations, Company Info and more.
The SDC 492 Emergency Door Release Pull Station provides immediate unlocking of perimeter doors or interior doors that are equipped with fail-safe electric locks. The 492’s built in alarm may be used as a local door annunciator.
The SDC 492 is specifically designed for emergency door release and may influence the approval of an electric locking system.
The SDC ZY7500 retrofit lockset replaces SDC Z7500 modifications of discontinued manufacturer models: Falcon - LM581 Sargent - 7704/7705 Corbin -9557L/2257 Russwin - 7059L Arrow -1600EW Yale – 8705 Almet - 5007 Best - 35HEW
Now available with SDC M7800, Z7800 and Z7500 Series locksets. Consult factory for pricing
413NU Narrow, ¾” W x 2” H button 423U 1 Gang, 2” button • Green illuminated push button, red optional • "PUSH TO EXIT" code compliant signage • Integrated electronic timer, adj. 1-60 Seconds • 12/24VDC, 2A DPST Contact
The 621 Series access control power supplies are designed to support access controls and electric locking devices. Equipped with two power limited outputs, the modular design enables versatility for installations with or without battery back-up or fire command center interface for emergency lock release.
The SDC 45 Series electric strike is designed for use with cylindrical and mortise locksets having up to ¾" latchbolts. The compact low profile design with an internally mounted solenoid and mounting tabs enable quick and easy installation where jamb space is limited. The heavy duty construction makes the 45 Series ideal for high traffic installations. • UL Listed, ANSI Grade 2 • Low Profile 1-1/8" Backset • Reversible Failsafe - Failsecure • Latch Status Output Standard • Keeper Closed & Locked Status Standard • Horizontal Alignment Adjustment $152 List ISC West New Product Preview Visit SDC Booth #19109
The SDC 25 Series electric strike is designed for use with cylindrical and mortise locksets with up to 5/8" throw latchbolt. The compact low profile design with an internally mounted solenoid and factory supplied mounting tabs enable quick and easy installation where jamb space is limited. The heavy duty construction makes the 25 Series ideal for high traffic installations.
• Low Profile - 1.25" Backset • Reversible Failsafe - Failsecure • Latch Status Output Standard $110 List
The SDC 15 Series electric strike is designed for use with cylindrical and mortise locksets. The 15 series electric strikes incorporates all stainless steel deadlocking mechanism and an internally mounted solenoid.
• For use with 5/8" latchbolt, or up to 3/4" latchbolt with 1/8" door gap • Choice of failsafe or failsecure • Non-handed • All stainless steel parts with durable die case body for corrosion resistance’ • 630 Satin stainless steel face plate • ANSI A156.31 compliant $80 List
SDC's new E5, 3000 user Access Control System is available with prox card or biometric fingerprint entry. Designed for PC managed or standalone applications, up to 99 readers may be networked for PC managed configurations. Choices of readers include HID compatible prox readers, fingerprint reader and digital keypads. $675 List
Field Upgradeable Emlock® Emlock® Webpage
SDC’s patented EMLock® design represents the pinnacle of magnetic lock evolution. The modular EMLock® assembly makes them easy to stock, install, upgrade and maintain. · Modular Design · Modular Upgrade Kits · Field Upgradeable without removing from the frame · Uniform Design & Installation · Identical Housing, Template & Accessories · Quick Mount Assembly EMLock® EZ Upgrade Kits Field upgradeable by distributors, installers and maintenance staff. No need to ever remove a lock from the frame to upgrade or exchange internal components. Upgrade Modules Include: · Relock Delay Timer · Magnetic Bond Sensor · Door Status Sensors · Anti-Tamper Switch · Holding Force Upgrade · Energy Saver Upgrade
New Standalone Access Control Reader
The E4KP EntryCheck™ is an HID compatible standalone proximity access control reader for up to 650 users. The weather resistant reader comes with a remote controller for high security. Field selectable access modes include: Proximity card only; Proximity card + PIN; or Key in card data or Prox Card. It is keypad programmable and does not require software and computer. $230 List
SDC Electric Cylindrical Lock With Rex Output
The new SDC manufactured Z7200 ANSI Grade 1 electric lock features a request-to-exit output, standard with all models. Features include failsafe or failsecure mode, clutch for vandal resistance, 12/24VDC input, ‘C’ type keyway, or optional I-Core. All lever handle styles are ADA compliant with choice of architectural finish. Operation includes access control or key entry. The inside lever provides egress at all times while activating a request-to-exit signal output. The SDC electric lock is UL Listed and approved for use on 3 hour fire rated doors, including stairwell doors where the use of magnetic locks and electric strikes is prohibited. $396 List