QUIET DUO™ ELR Kit
Installation Instructions
ADAMS RITE Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100ARK
Rim Installation Instructions Models: 3700 & 8800 Rim Mount |
LRAR1R - REX Switch Assembly
|
|
Vertical Rod Installation Instructions
Models: 3100, 8100, 8200 Surface Vertical Rod 8500, 8600, 3600 Concealed Vertical Rod |
LRAR1R - REX Switch Assembly
|
|
LR100ARK-EM
Rim Installation Instruction Models: 3700, 8700, 8800 Rim Mount |
LRAR1R - REX Switch Assembly
|
|
Vertical Rod Installation Instructions
Models: 3100, 8100 and 8200 Surface Vertical 3600, 8500 and 8600 Concealed Vertical |
|
|
LR100AREXK
Installation Instruction Models: EX76, EX88 & EX89 |
LRAREX1R
Models: EX76, EX88 & EX89 |
|
*EM models are space saver kits intended to gain about 3/4 “ to an 1” in spacing within a device. Controller Board is placed externally
|
|
ARROW 1000 Series Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100AWK
Models: S1250 Rim Mount S1150 Surface Vertical Rod |
|
|
LR100AWK-ED910
Models: ED910 Rim Mount |
CAL-ROYAL Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100CAK
Models: 7700 Rim Mount F7760 Surface Vertical Rod |
INST-LRCA2R
Models: 7700, F700 Rim Mount 7760, F7760 Surface Vertical Rod |
|
LR100CAK-EM
Models: 2200, F2200, 9800 and F9800 Rim Mount 2260, F2260, 9860, F9860 Surface Vertical Rod |
|
* EM models are space saver kits intended to gain about 3/4 “ to an 1” in spacing within a device. Controller Board is placed externally. |
|
|
* LR100CAK-9800
Models: * GLS9800 Rim Mount * GLSCVR9860 Concealed Vertical Rod |
INST-LRCA1R
Models: 9800 & GLSCVR9800 Series |
* Kit intended for Cal-Royals Narrow Stile Exit Devices (Different from their standard 9800 series exit device) |
|
CORBIN RUSSWIN ED Series Exit Device
DESIGN HARDWARE Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100DHK
Models: 1000R Rim Mout 1000V Surface Vertical Rod |
DETEX Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100DXK
Models: 10, 40 Rim Mount 20, 50 Surface Vertical Rod 62, 63, 80, 81 Concealed Vertical Rod |
LRDX1R - Push Bar REX Switch
|
DORMA Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100DAK
Models: 9300 Rim Mount 9400 Surface Vertical Rod |
LRDA1R - REX Switch
Models: 9300, F9300, 9400 & F9400 |
FALCON Exit Device
FALCON / DOR-O-MATIC Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100DMK
Models: 1490 Concealed Vertical Rod 1590 Rim Mount |
LRFA1R - REX Status Kit
|
|
LR100FAK
Models: 1690 Concealed Vertical Rod 1790 Rim Mount |
|
|
LR100FAK-EM
Models: 1690 Concealed Vertical Rod 1790 Rim Mount |
|
* EM models are space saver kits intended to gain about 3/4 “ to an 1” in spacing within a device. Controller Board is placed externally |
|
FIRST CHOICE Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100FCK
Models: 3600 Concealed Vertical Rod 3700 Rim Mount |
LRFC1R - REX Status Kit
|
|
LR100FCK-EM External Module
Models: 3600 Concealed Vertical Rod 3700 Rim Mount |
|
*EM models are space saver kits intended to gain about 3/4 “ to an 1” in spacing within adevice. Controller Board is placed externally |
|
HAGER Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100HK:
Models: 4501-SVR - Surface Vertical Rod 4501-RIM - Rim Mount |
LRH1R - REX Status Kit
LRH1L - Latch Status Kit
|
|
LR100HK-EM
Models: 4501-SVR - Surface Vertical Rod 4501-RIM - Rim Mount |
LRH1R - REX Status Kit
LRH1L - Latch Status Kit
|
*EM models are space saver kits intended to gain about 3/4 “ to an 1” in spacing within a device. Controller Board is placed externally |
|
IDC (International Door Closers) Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100IDCK
Models: 8610, 8810, 8510, 8710 Rim Mount 8630, 8830, 8530, 8730 Surface Vertical Rod 8620, 8820 Mortise 8650, 8850, 8550, 8750 Concealed Vertical Rod |
LRIDC1L / LRIDC1R - Field Retrofit Latch Status/Rex Switch Kit
|
|
LR100IDCK-EM
Models: 8610, 8810, 8510, 8710 Rim Mount 8630, 8830, 8530, 8730 Surface Vertical Rod 8620, 8820 Mortise 8650, 8850, 8550, 8750 Concealed Vertical Rod |
LRIDC1L / LRIDC1R - Field Retrofit Latch Status/Rex Switch Kit
|
*EM models are space saver kits intended to gain about 3/4 “ to an 1” in spacing within a device. Controller Board is placed externally |
|
JACKSON Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100JAK
Models: 2085 Concealed Vertical Rod (top latch) 2095 Rim |
KAWNEER ELECTRIC Exit Device
RIM Device Only
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100KWK-EM
Models: 1786 RIM DEVICE |
LRKWK1R - REX Switch Kit
LRKWK1L - Latch Switch Kit
|
MARKS Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100MDK
Models: M9900VR Surface Vertical Rod M9900 Rim Mount |
LRMD1R
Models: M9900 Rim Mount |
MARSHALL BEST Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100MBSK
Models: Q1100, QF1100 Rim Mount Q1200 / QF1200 Surface Vertical Rod |
|
|
LR100MBSK-EM
Models: Q1100, QF1100 Rim Mount Q1200 / QF1200 Surface Vertical Rod |
|
*EM models are space saver kits intended to gain about 3/4 “ to an 1” in spacing within a device. Controller Board is placed externally |
|
PAMEX Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
INST-LR100PAK
Models: EF9000 Rim Mount EF9000V Surface Vertical Rod EF9020V Concealed Vertical Rod |
LRPA1L / LRPA1R - Field Retrofit Latch Status/Rex Switch Kit
|
PDQ Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100PDQK
Models: 6200R Rim Mount 6200V Surface Vertical Rod |
LRPDQ1L: Latch status
LRPDQ1R: REX Switch Kit
Model: 6200R |
PHI (Precision Hardware) Exit Device
SARGENT Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100SGK
Models: 8300 Mortise 8400 Concealed Vertical Rod 8500 Rim Mount 8600 Concealed Vertical Rod 8700 Surface Vertical Rod 8800 Rim Mount 8900 Mortise |
LRSG2R: Request-To-Exit ELR Switch Kit
|
|
LR100SGK-EM
Models: 8300 Mortise 8400 Concealed Vertical Rod 8500 Rim Mount 8600 Concealed Vertical Rod 8700 Surface Vertical Rod 8800 Rim Mount 8900 Mortise |
|
*EM models are space saver kits intended to gain about 3/4“ to an 1” in spacing within a device. Controller Board is placed externally |
|
SDC Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100SDCK
Models: S6100 Rim Mount S6200 Surface Vertical Rod S6300 Mortise S6800 Concealed Vertical Rod |
LRSDC1L : Latch Status
LRSDC1R : REX Switch Kit
|
|
LR100SDCK-EM:
Models: S6100 Rim Mount S6200 Surface Vertical Rod S6300 Mortise S6800 Concealed Vertical Rod |
LRSDC1L : Latch Status
LRSDC1R : REX Switch Kit
|
*EM models are space saver kits intended to gain about 3/4 “ to an 1” in spacing within a device. Controller Board is placed externally |
|
STANLEY K2 Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100K2K
Models: QED111 Rim Mount QED114 Surface Vertical Rod QED124 Concealed Vertical Rod |
LRK2R: REX Switch Kit
|
|
LR100K2K-EM
Models: QED111 Rim Mount QED114 Surface Vertical Rod QED124 Concealed Vertical Rod |
|
*EM models are space saver kits intended to gain about 3/4 “ to an 1” in spacing within a device. Controller Board is placed externally |
|
TELL Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100TEK
Models: 9500 Rim Mount 9400 Surface Vertical Rod |
TOWNSTEEL Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100TSK
Models: ED1100 Rim Mount, ED1200 Surface Vertical Rod ED1300 Concealed Vertical Rod |
LRTS1R: REX Switch
|
|
LR100TSK-55-56
Models: ED5500 Rim Mount ED5600 Surface Vertical Rod |
LRTS2R: REX Monitoring Kit
Model: ED5500 |
|
LR100TSK-65-67
Models: ED6500 Rim Mount ED6700 Surface Vertical Rod |
|
|
LR100TSK-EM
Models: ED1100 Rim Mount ED1200 Surface Vertical Rod ED1300 Concealed Vertical Rod |
|
*EM models are space saver kits intended to gain about 3/4 “ to an 1” in spacing within a device. Controller Board is placed externally |
|
VON DUPRIN Exit Device
YALE Exit Device
|
RETROFIT DEVICE KIT
|
OPTIONS
|
|
LR100YDK
Models: 7100, 7100-2, 7200 Rim Mount 7110, 7210 Surface Vertical Rod 7120, 7220 Concealed Vertical Rod |
LRY1L: Latch Switch Kit
LRY1R : Rex Status Kit
|
|
LR100YDK-EM
Models: 7100, 7100-2, 7200 Rim Mount 7110, 7210 Surface Vertical Rod 7120, 7220 Concealed Vertical Rod |
LRY1L: Latch Switch Kit
LRY1R : Rex Status Kit
|
|
LR100Y6K
Models: 6100ED - Rim |
LRY61R: REX Switch Kit
|
|
LR100Y6K-EM
Models: 6100ED - Rim |
LRY61R: REX Switch Kit
|
*EM models are space saver kits intended to gain about 3/4 “ to an 1” in spacing within a device. Controller Board is placed externally |
|